13T Battery Crimper Li-Ion-Long Head

Product Description

13T Battery Hydraulic Crimper Li-Ion Long Head
The B1300L-CT is suitable for a wide range of connectors up to 400mm– using all semi-circular slotted dies common to Cembre 130 kN tools. A large 44mm jaw opening allows easier introduction/removal of compression terminations and joints.

New Li-Ion 18V 4 Ah batteries offer a higher capacity than 14.4V 3 Ah, while greater crimping speed and crimping force result from a revitalised hydraulic system with double speed action: a more rapid approach of the dies to the connector then a more controlled, powerful speed for crimping.

A maximum pressure sensor and security valve together assure greater precision and repeatability of the pressure cycle and double the provision for operator safety.

13T Battery Hydraulic Crimper Features
• Greater crimping speed and force
• Maximum pressure sensor and security valve for greater precision and operator safety
• Bi-component plastic shell provides high resistance to wear and damage
• Rubber grip
• Low noise and minimal vibration for operator comfort
• LED lighting area for additional convenience and safety
• Crimping cycle data (up to 200,000 events) stored on memory card for transfer to PC by USB interface

Li-Ion Battery Features
• Provides 100% of its energy between -15°C and 50°C
• Electronic control of single cells to avoid overcharging and undercharging
• Air-cooled charging technology to increase battery life
• Quickest charging time
• Auto-off to optimise energy consumption

Technical Data


Crimping Force 132kN

Jaw Opening Length 42mm

DimensionsLength: 471mm Height: 239mm Width: 102.5mm

Battery Li-Ion 18V 4.0 Ah

Weight (with battery) 8.0kg


OLED Display
The OLED display provides essential real time tool operating information data including:
• Minimum set force and momentary force reached expressed in kN (confirms correct operation
• Minimum set force and momentary force reached expressed in US Ton (confirms correct operation)
• Minimum set pressure and momentary pressure reached expressed in bar (confirm correct operation)
• Minimum set pressure and momentary pressure reached expressed in Psi (confirm correct operation)
• Battery charge level
• No. of cycles performed and No. of cycles recommended before scheduled maintenance
• Cembre logo, tool model and tool serial No.
• LED Worklights (On and Off)
• Return to factory settings/firmware version

The B1300L-CT is supplied with
• Battery and shoulder strap
• Spare battery
• Battery charger
• Plastic carrying case suitable for storing the tool and 12 die sets