Cable Stripping Tools

So, you’re preparing your network cables for termination with RJ45 connectors. In this case, a cable stripper can come in handy. You can use this tool to remove the outer jacket of a network cable cleanly. This won’t damage the wires inside. This is an important step before you terminate the cables onto RJ45 connectors. It will expose the individual conductors that you need to align properly and crimp. Get a good cable stripper, so that you can prepare the cable quickly.

You can use a cable stripper for stripping both Ethernet cables and fiber optic cables. However, you need to be cautious. You know, there are some advanced cable strippers that you can adjust the blades and settings. This allows them to work on both Ethernet and fiber optic cables. However, fibre optic cables are basically delicate. You’ll need a stripper that’s meant particularly for fiber. This ensures that they won’t crack or weaken the glass fibres during stripping.

So, you’re working with Cat 6A cables. A cable stripper will prove valuable in these settings. As you know, Cat 6A cables are thicker. They have a tight shield that help the data transfer at high speed. Get a cable stripper to remove this jacket neatly. These tools preserve the integrity of the internal parts and twisted pairs.

You have loose tube cables outdoors, and there are multiple buffer tubes in those cables. They have to be carefully stripped, otherwise you might end up damaging the fibres inside. Get a cable stripper that can go well with the specific diameter. Also, it must be compatible with the type of jacket of the loose tube cables. Get a cable stripper where you can adjust the depth of the blade.

People often make a common mistake when they use a cable stripper on network cables. So, take care that you don’t end up nicking the inner wires, which can damage the conductor. Also, a common mistake is to use the wrong type of stripper for the cable. Say, you’re using an Ethernet stripper on fiber cables – it’s a mistake. Don’t strip a large part of the cable jacket as the wires will become exposed and vulnerable. You just need to match the tool to the cable and be well-controlled with your motion.