- Specially made for terminating large cables to circuit breakers
- Narrow palm design fits int circuit breaker connection tunnel
- Unique bellmouth for easy insertion of fine stranded conductors
- Made from 99.9% high conductivity copper
- Complies to AS/NZS4325.1
Copper Circuit Breaker Lugs
CABAC Circuit Breaker Lugs are specially made for terminating large cables to circuit breakers. Since flashover distances have reduced, the connecting tunnel in breakers has become narrower, and fitting lugs in 150 to 250A breakers has become a problem because the palms of conventional lugs are too wide. This range of lugs have the same barrel dimensions as the standard range, so normal crimping rules apply, using the correct die for the cable size.
Many switchboard builders use flexible cables and this lug features a unique bell mouth, which makes insertion of fine stranded conductors much easier.
Made from 99.9%+ cu high conductivity copper, this lug provides the best electrical properties possible.
If a lug is not listed for your application please contact CABAC sales, as we are continually adding to the range.
Standards and Compliance
AS/NZS4325 Part 1; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and UL/NEMA USA
Test reports are available on request
Nominal Conductor (mm2): 240
ID Size (mm): 21.2
Stud (mm): 10
Qty Per Box: 1
Copper 99.95% pure
Oxygen content 30 p.p.m Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state fully annealed
Tin 99.9% pure
Other metals lead + antimony
Thickness 5 -10 microns
General Electrical Properties
Total conductivity 99.7% IACS
Total resistivity: 1.738 micro-ohm cm
-55 to 155 deg C due to oxygen-free copper
Tooling is interchangeable between CABAC, Utilux and Burndy
|Stud Size (mm):||10|
|Cable Size (mm2):||240|
|Lugs and Links - Material:||Copper|
|Lug Type:||Circuit Breaker|
Your ordered quantity for this item is more than what we have in stock.
Please contact us to know more about this item's availability or possible restock dates.