- Copper lug 150 sq. mm
- Palm M20 stud
- Made from pure tinned copper
Copper Crimp Lug - Standard Range
CABAC copper crimp lugs are made from 99.9%+ cu high conductivity annealed copper which gives the best electrical properties possible.
CABAC copper crimp lugs are capable of withstanding a continuous operating temperature of 155– C, which is well above the temperature properties of most lugs.
It is our recommendation that CABAC copper crimp lugs should be crimped with standard Australian tooling.
Standards and Compliance
Test reports are available on request
Conductive Material Copper 99.95% pure Oxygen content 30 p.p.m Max. Tensile strength 200 MPa Ductile rating 40% Final metal state fully annealedDimensional Specification Tooling is interchangeable between CABAC, Utilux and Burndy
Electroplating Material Tin 99.9% pure Other metals lead + antimony Thickness 5 -10 microns Conformant Standards AS4325 Part 1 Australia; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and NEMA USA
General Electrical Properties Total conductivity 99.7% IACS Total resistivity: 1.738 micro-ohm cm Operating Temperature -55Â°C to 155Â°C due to oxygen-free copper
Accepting Authorities Electricity Services Victoria Energy Australia Rail Services Australia Energex Western Power Ergon Integral Energy Country Energy Powercor and many other recognised authorities Torque Recommendations For hardware being metric 8.8 tensile grade
Thread dia.(mm)Torque (Nm)
See online catalogue page for line drawing of dimensions and tooling information.
|Stud Size (mm):||20|
|Cable Size (mm2):||150|
|Lugs and Links - Material:||Copper|
Your ordered quantity for this item is more than what we have in stock.
Please contact us to know more about this item's availability or possible restock dates.