RJ Plugs

An RJ45 is a special type of connector that is mainly used for Ethernet networking. It looks like a telephone jack but is slightly wider than a telephone jack. These connectors link several voice and data equipment either directly to each other or to a central hub or switch.

Some common uses of RJ45 connectors are as follows

• An RJ45 connector allows you to connect laptops, routers, switches, printers, and other networking devices to create either local area networks or wide area networks.
• These connectors allow you to terminate Ethernet cables, which are then organized and managed within the structured cabling infrastructure to facilitate efficient network connectivity.
• RJ45 connectors are used to connect modems or routers to broadband or DSL internet service. 
• You can connect many Voice over IP (VoIP) phones to Ethernet networks for voice communication using an RJ45 connector.
• Using an RJ45 connector you can connect various smart devices, such as smart thermostats, lighting controls, and home automation hubs, to the home network. 

Follow the steps given below if you want to connect the rj45 connector effortlessly.

1.  Prepare the cable
   • Firstly, measure and cut the Ethernet cable to the desired length. Once you get the desired length, use a cable stripper and remove about 1 to 2 inches or 2.5 to 5cm of the outer insulation covering, so the twisted pair of wires inside the cable gets exposed
2. Arrange the wires
   • In this step, you need to untwist and straighten the individual wire pairs according to the T568A or T568B wiring standard.
3. Trim and Align the wires
   • After straightening the individual wires according to the desired wiring scheme, trim any excess wire length to ensure all wires are uniform and properly aligned.
4. Insert the wires inside the RJ45 connector
   • In this step, insert the wires into the RJ45 connector. Finally, after inserting the wires inside the RJ45 connector check whether the wires reach the end of the connector or not.
5. Crimp the RJ45 connector
   • Place the RJ45 connector into the crimping tool and squeeze the crimping tool firmly to crimp the connector onto the cable.
6. Test the connection
   • Finally, use a cable tester to verify the continuity and proper wiring of the Ethernet cable. 

To get the best quality RJ45 connector online, it is always beneficial to visit MSS Data Solutions. MSS Data Solutions is a reputable online supplier, and here, you will get a variety of connectors, cables, and networking solutions that will meet your needs.

To buy RJ45 connector online from MSS Data Solutions, visit our website and browse the product catalog. You can also contact MSS Data Solutions through the customer service channels to inquire about specific products, pricing, and availability.

Before deciding to buy RJ45 connector online, consider the factors discussed in this section.

• Connector Type - RJ45 connectors come in various types, including standard connectors, shielded connectors (for environments with electromagnetic interference), and modular connectors. So, determine which type of connector you require and eventually select the best one as per your requirements.
• Quality and Reliability - Invest in high-quality connectors to ensure reliable network connections and longevity. For better conductivity and corrosion resistance, you can also look for connectors with gold-plated contacts.
• Compatibility – You should ensure that the RJ45 connectors are compatible with the type of Ethernet cable you are using (e.g., CAT5e, CAT6, CAT6a).
• Additional features - Depending on your requirements, you may need RJ45 connectors with specific features, such as strain relief boots (to prevent cable damage), locking tabs (for secure connections), or colour-coding (for easy identification).

If you are staying in Australia and are looking to buy RJ45 connector online, surely visit MSS Data Solutions. Our website provides several kinds of RJ45 connectors, including Cat6 RJ45 Coupler Keystone, Cat5E RJ45 connector jack and Strain Relief Boots for RJ45 connectors, etc.

At MSS Data Solutions, all RJ45 connectors undergo stringent quality checks to meet industry standards and perform flawlessly.

We also take bulk orders, so whether you need RJ45 connectors for a small project or a large-scale installation, you can purchase them in bulk to save time and money. We deliver our products to your doorstep, so you can get the products effortlessly no matter where you are in Australia.

FAQ RJ45 Connectors